Este sitio Web utiliza cookies propias y de terceros con objeto de mejorar la experiencia de navegación. Si continúa navegando estará aceptando de forma expresa el uso de estas cookies. Puede obtener más información en nuestra página Uso de Cookies

Accept
  • CHARPY/IZOD AUTOMATIC NOTCHER (Easy2818):
  • CHARPY/IZOD AUTOMATIC NOTCHER (Easy2818):

CHARPY/IZOD AUTOMATIC NOTCHER (Easy2818):

Cod: 101001Standard: ASTM D256, ASTM D6110, ASTM D5942, ISO 179-C, ISO 180-A,B, etc.

Equipment for preparing Charpy/Izod impact test specimens. Before carrying out the test, the samples must be notched to create a grimace and predict the fracture point. The ATS model for plastics can carve samples up to 28 3.2mm (1/8 ") in thickness each time.The operation of this notching machine is automatic and requires minimal supervision by the operator. Once the sample has been loaded, the operator starts the test with a button push.

The quality of the mono-axial impact tests depend to a large extent, on the accuracy of the notch performed on the specimen. 

Contact Form

You can get in touch with us filling the contact form below.

REQUEST ESTIMATE
    • Share:
    With the Electric Notcher, the plastic specimen are clamped and notched by the combination of the following movements:
    • Alternate vertical displacement of the knife with electronic adjustable speed.
    • Horizontal displacement - linear translation - of the clamp where the specimen is located by manual control.

    The constant profile of the knife and the design of the specimen centering and blocking system, guarantee high accuracy and repeatability.
    • Alternate vertical displacement of the knife: 30 mm.
    • Linear speed of the notch: 0 ± 18 m/min with electronic control.
    • Height of the sample support: 25 mm.
    • Width of the sample support: 15 mm.
    • Notching area is suitable to locate up to 8 specimens / 3 mm thick or up to 6 specimens / 4 mm thick.
    • Adjustment of the depth of the notch with reference to the residual section of the specimen (ISO 2818).
    • Type A: for “V”-shaped notch (45° ± 1°, radius 0.25 ± 0.05 mm), in accordance with ASTM D 256 – ASTM D 6110, ISO 179, ISO 180 (type A), - BS 2782 350 - DIN 53753.
    • Type B: for “V”-shaped notch (45° ± 1°, radius 1mm ± 0.05 mm) in accordance with ASTM D 256 – ISO 179, ISO 180 (type B) - BS 2782 350.
    • Type C: for “V”-shaped notch (45° ± 1°, radius 0.1mm ± 0.02 mm) in accordance with ISO 179 (type C) - DIN 53753.
    • Type D: for “U”-shaped notch (width 2 mm ± 0.2 mm), in accordance with DIN 53453.
    • Type E: for “U”-shaped notch (width 0,8 mm ± 0.1 mm), according to DINSTAT 53453 Type K.

    Check our Terms and Conditions

    • IDM Paper
    • IDM Pulp
    • IDM Cardboard
    • IDM Graphic Industry
    • IDM Plastic
    • IDM Metal
    • IDM Fire
    • IDM Wood and Furniture
    • IDM Various Equipment