You are at: 

IDMtest Civil Engineering


Concrete

MANUAL COMPRESSION MACHINES DG Series

   

Cod. 500101


Standards: ASTM C39, AASHTO T22, EN 12390-3,-4,-5 and Other ASTM, EN & BS standards depending on platens and accessories chosen.

Hydraulic compression testing machine technologies with capacities from 0-3000 kN (0-600,000lbf).  Pace deviation bar graph; Automatic stress determination and display; Interlockied safety door; Overload and over travel safety protection; Self aligning platen with fast accessory change capability.

 

AUTOMATIC COMPRESSION MACHINES MU Series

 

Cod. 500102

Standards: ASTM C39, AASHTO T22, BS, EN & Other ASTM standards depending on platens and acceeories chosen.

Hydraulic compression testing machine technologies with capacities from 0-3000kN (0-600,000lbf). Automatic Pace Rate Control at a preset value; Automatic Data Logging; Logged Data Priinting Facility; Data storage for up to 150 runs; Multi functional LCD interface; Menu Driven interface; Auto Shut down facility; Load hold facility; Manual emergency stop button; Peak load record; Bar Graph Display for on-line monitoring of quality control; Automatic control of the pump motor; Automatic display of breaking load at the end of the test; Real time clock to keep automatic track of the date, time and runs; Calibration checking facility; Support for additional compression or flexure units (optional)

 

AUTOMATIC COMPRESSION MACHINES FA Series

   

Cod. 500103

Standards: ASTM C39, AASHTO T22, BS, EN & other ASTM standards depending on platens and accessories chosen.

Hydraulic compression testing machine technologies with capacities from 0-3000 kN ( 0-600,000lbf). Automatic Pace Race Control at a preset value; Automatic Data Logging and printing capable.; Data Storage for up to 2000 runs; Menu Driven interface; Auto shut down facility; Peak load record; Automatic display of breaking load at the end of the test; Real time clock to keep automatic track of the date, time, and runs; Support for an additional compression or flexure units (optional); An automatic load release facility: Measurement of the strain with a resolution up to 0,001mm (optional feature); Measurement of Flexural Strenght (optional feature)

 

PORTABLE COMPRESSION TESTING MACHINE

 

Cod. 500104

This system consists of a four column loading fram, a pumping unit, and a calibrated ECO Digital Readout mounted on the top of the test frame.  The detachable hydraulic piston assembly is mounted on the loading frame base. 

 

FLEXURE TESTING MACHINES

 

Cod. 500114 & 500115

Standards: BS 1881, ASTM C78-02, BS EN 12390-5:2000

These machines are designed to test the flexural strenght of concrete beams.  Their desing provides maximum rigidity throughout their working range as load is applied by the downward movement of the piston.  A spacer is providad for testing different size of beams and load is indicated on a digital indicator.

 

SLUMP TEST

   

Cod. 500111

Standards: EN 12350-2, ASTM C143

The sheet steel slump cone is filled with freshly mixed concrete and is tamped with a tamping bar in four layers. The top of the concrete is leveled off with the top of the slum cone; the cone sis lifted off the base and the slump of the sample is immediately measured.  This test is considered suitable for cohesive and plastic mixes of concrete containing aggregate smaller than 50mm. Supplied complete with base plate, having cleats and swivel handle and tamping rod of 16mm diameter x 600 mm long.

 

CONSISTOMETER

 

Cod. 500116

Standards: BS 1881 (Part 104:1983), AASHTO T126, BS EN 12350-3, ASTM C1170, AS1012 (Part 3)

This method is a mechanical variation of the simple slump test that includes determination of the workability of concrete.  The concrete is formed in a slump cone positioned in a containe, and is vibrated at a fixed amplitude and the frequency after the cone is removed, on a small vibrating table.  A plastic spacer disc on the top surface of the wet concrete allows the operator to judge when the compaction is complete. The time to complete the required vibrations gives an indication of the workability of concrete, which is expressed in Vee-Bee degrees. The consistometer includes a vibrating table, specimen pot, slump cone, graduated rod, and acrylic plate.

 

 

MOTORISED FLOW TABLE

 

Cod. 500117


Standards: AASHTO T126

The flow table is designed for determining the workability of Portland cement concrete.  The 76,2 cm diameter table top is finely machined from a solid brass casting; the stand is made from cast iron. Operation is simple, where the ground and hardened steel cam is desingned to drop the table by 12,5mm.